Transparent LED Display
XLC Outdoor Series
IP68 transparent LED for street-facing glass and canopies
The XLC Outdoor Series brings the transparent format outdoors with five sealed models from P3.91–7.82 to P7.8–15.625. The 7.5 kg/m² build, 5,000-nit output and IP68 protection suit street-facing glass, canopies and transit frontage.
- Pixel pitch
- P3.91–7.82
- Transparency
- 70%
- Brightness
- 5,000 nits
- IP rating
- IP68
How the format works
The outdoor version uses sealed strip modules with higher-brightness LEDs and a protected power enclosure. The open structure lets air pass through, reducing wind load compared with a solid panel.
Selection notes
- Street-facing glass, canopies and covered frontage with direct daylight
- Five sealed pitch options matched to the facade and viewing distance
- Service access agreed with the building maintenance plan
Where this format fits
The series is chosen for the way the space is used and viewed, not only for the size of the opening.
IP68 sealed build
The outdoor series is rated IP68 for exposed street, canopy and transit positions.
Daylight readable
A 5,000-nit white balance and automatic dimming hold contrast against direct street light.
Retains the facade
The open structure keeps the building line visible instead of covering it with a solid panel.
Low weight
The 7.5 kg/m² build reduces the load on facade brackets and canopy structures.
Model specifications
The model table shows the range for this series. Site conditions determine the final cabinet, brightness and control configuration.
| Model | Pixel pitch | Transparency | Brightness | Cabinet size | Module size | Weight | IP rating | Refresh rate | Power | Control |
|---|---|---|---|---|---|---|---|---|---|---|
| XLC 3.91-7.82 | P3.91–7.82 | 70% | 5,000 nits | On request | 1,000 × 1,000 mm | 7.5 kg/m² | IP68 | ≥3,840 Hz | 100–300 / 800 W/m² | 1/8S scan |
| XLC 7.82-7.82 | P7.82–7.82 | 75% | 5,000 nits | On request | 1,000 × 1,000 mm | 7.5 kg/m² | IP68 | ≥3,840 Hz | 100–300 / 800 W/m² | 1/4S scan |
| XLC 5.2-10.4 | P5.2–10.4 | 80% | 5,000 nits | On request | 1,000 × 1,000 mm | 7.5 kg/m² | IP68 | ≥3,840 Hz | 100–300 / 800 W/m² | 1/4S scan |
| XLC 10.4 | P10.4 | 80% | 5,000 nits | On request | 1,000 × 1,000 mm | 7.5 kg/m² | IP68 | ≥3,840 Hz | 100–300 / 800 W/m² | 1/2S scan |
| XLC 7.8-15.625 | P7.8–15.625 | 80% | 5,000 nits | On request | 1,000 × 1,000 mm | 7.5 kg/m² | IP68 | ≥3,840 Hz | 100–300 / 800 W/m² | 1/4S scan |
Typical values shown for series comparison. Final specifications are confirmed against the project configuration and current datasheet.
Verification
What you can check before the order
A transparent screen is an optical, structural and electronic decision at the same time. The points below show what can be reviewed with the sample, the drawings and the batch record rather than taken on trust.
Request the verification packSample measurement
A sample module can be measured against the agreed pitch, transparency and brightness before the batch is released.
Batch test record
Aging and outgoing inspection records are matched to the serial numbers that ship with the project.
Interface drawings
Fixing, power and signal routes are issued for approval before production starts.
Locked datasheet
The final datasheet follows the confirmed bill of materials. Catalogue values stay typical until then.
Catalogue values are typical. The project datasheet, test record and drawings are the controlling documents for the confirmed configuration.
Applications
All markets
Retail & Storefront
Window and in-store displays that add motion at street level while keeping the shop interior visible.
DOOH & Advertising
Street-level and venue media surfaces that carry advertising without turning the building into a solid billboard.
Architecture & Glass Facade
Facade media that follows the building line and keeps the glazing readable behind the screen.
Installation and service
Mounting and service are agreed with the site, not assumed from the product drawing.
- Fixed to the facade structure with project-specific brackets
- Condensation and drainage paths agreed at design stage
- Service access coordinated with the building maintenance plan
Maintenance
Front or rear service depends on the mounting depth. Power and receiving cards are modular and field replaceable.
Project package
What ships with the screen
The quotation is built around the site, so the package is confirmed before production. A typical project includes:
- LED cabinets, modules and a matched spare set
- Power, data and control cabling for the agreed layout
- Receiving cards with the controller configuration
- Aging test record and outgoing inspection checklist
- Installation drawings, wiring schedule and service guide
Typical package shown for planning. Final scope, spares and documentation are confirmed in the quotation.
Technical documents
Documents are issued against the confirmed configuration. No download files are published before the model and control package are fixed.
Related series
Specify the XLC Outdoor Series for your project
Share the site conditions and target date. We will confirm the model, cabinet layout and control package.
Mon to Fri, 09:00 to 18:00 (GMT+8)