LED Holographic Screen
XLH Holographic Series
Near-invisible display from P2.5 to P20
The XLH Holographic Series uses a fine open structure and a dark content field so the display almost disappears when off. Nine models from P2.5 to P20 use 1,500 mm modules, a 2 kg/m² build and 70–98% transparency.
- Pixel pitch
- P2.5
- Transparency
- 70%
- Brightness
- 5,000 nits
- IP rating
- IP43
How the format works
A fine-pitch open module carries the image while the background stays dark. When the content is composed against black, the lit pixels read as objects floating in the room rather than as a rectangular screen.
Selection notes
- Controlled interior light where content can be composed against black
- Showrooms, launches and exhibitions with a defined viewing position
- Ceiling or recessed mounting with service access above the display
Where this format fits
The series is chosen for the way the space is used and viewed, not only for the size of the opening.
Nine holographic models
Pitches from P2.5 to P20 cover close product reveals through large open interiors.
Disappears when idle
The screen stays visually quiet between content cycles, keeping the interior intact.
2 kg/m²
The lightweight module reduces the load on ceiling hangers and recessed frames.
Up to 98% transparency
The high open area keeps the space and the product visible behind the display.
Model specifications
The model table shows the range for this series. Site conditions determine the final cabinet, brightness and control configuration.
| Model | Pixel pitch | Transparency | Brightness | Cabinet size | Module size | Weight | IP rating | Refresh rate | Power | Control |
|---|---|---|---|---|---|---|---|---|---|---|
| XLH 2.5 | P2.5 | 70% | 5,000 nits | Holographic film, project size | 1,500 × 160 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLH 3.508 | P3.508 | 80% | 5,000 nits | Holographic film, project size | 1,500 × 224 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 3.91 | P3.91 | 85% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 5 | P5 | 88% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 6.25 | P6.25 | 90% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 7.82 | P7.82 | 95% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 10 | P10 | 95% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤240 / ≤800 W/m² | Static scan |
| XLH 15.625 | P15.625 | 95% | 5,000 nits | Holographic film, project size | 1,500 × 250 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤200 / ≤600 W/m² | Static scan |
| XLH 20 | P20 | 98% | 5,000 nits | Holographic film, project size | 1,500 × 240 mm | 2 kg/m² | IP43 | ≥3,840 Hz | ≤120 / ≤400 W/m² | Static scan |
Typical values shown for series comparison. Final specifications are confirmed against the project configuration and current datasheet.
Verification
What you can check before the order
A transparent screen is an optical, structural and electronic decision at the same time. The points below show what can be reviewed with the sample, the drawings and the batch record rather than taken on trust.
Request the verification packSample measurement
A sample module can be measured against the agreed pitch, transparency and brightness before the batch is released.
Batch test record
Aging and outgoing inspection records are matched to the serial numbers that ship with the project.
Interface drawings
Fixing, power and signal routes are issued for approval before production starts.
Locked datasheet
The final datasheet follows the confirmed bill of materials. Catalogue values stay typical until then.
Catalogue values are typical. The project datasheet, test record and drawings are the controlling documents for the confirmed configuration.
Applications
All marketsExhibition & Showroom
Near-invisible displays for showrooms, launches and exhibition stands where the product should lead.
Retail & Storefront
Window and in-store displays that add motion at street level while keeping the shop interior visible.
DOOH & Advertising
Street-level and venue media surfaces that carry advertising without turning the building into a solid billboard.
Installation and service
Mounting and service are agreed with the site, not assumed from the product drawing.
- Suspended from ceiling structure or set into a recessed frame
- Content and lighting designed together to hold the floating effect
- Service access planned above or behind the display
Maintenance
Module-level replacement from the service side. Content updates run through the venue network or a local player.
Project package
What ships with the screen
The quotation is built around the site, so the package is confirmed before production. A typical project includes:
- LED cabinets, modules and a matched spare set
- Power, data and control cabling for the agreed layout
- Receiving cards with the controller configuration
- Aging test record and outgoing inspection checklist
- Installation drawings, wiring schedule and service guide
Typical package shown for planning. Final scope, spares and documentation are confirmed in the quotation.
Technical documents
Documents are issued against the confirmed configuration. No download files are published before the model and control package are fixed.
Related series
Specify the XLH Holographic Series for your project
Share the site conditions and target date. We will confirm the model, cabinet layout and control package.
Mon to Fri, 09:00 to 18:00 (GMT+8)